Roofing Services — Roof Coatings
Roof Coatings Fort Lauderdale
Elastomeric coatings that seal, waterproof, and extend the life of an existing roof without the cost of a full replacement.
★★★★★ 4.8
GOOGLE · 106 REVIEWS
Local & Family Owned
SINCE 2013
ShingleMaster
CERTAINTEED, GAF & IKO SHINGLES
GAF Certified
CERTIFIED ROOFING CONTRACTOR
Licensed
CCC1331129 / CBC1259476
No Deposit Required — You Only Pay When You’re Satisfied
What Does A Roof Coating Do?
A roof coating is a seamless, waterproof elastomeric layer applied over an existing roof — typically flat, metal, or aging shingle/tile systems — to seal minor cracks and seams, reflect heat, and extend the roof’s useful life before a full replacement is needed.
Roof Coatings — In Depth
How Roof Coatings Work
A roof coating is a fluid-applied, seamless membrane rolled or sprayed directly onto an existing roof surface. Once cured, it forms a continuous waterproof layer that seals minor cracks, gaps, and seams. Most coatings are also reflective, bouncing solar heat away from the building instead of absorbing it, reducing roof surface temperature and, by extension, attic heat.
Types Of Roof Coatings
Elastomeric acrylic coatings are the most common choice for sloped and low-slope residential and light-commercial roofs — durable, flexible, and cost-effective. Silicone coatings offer superior resistance to ponding water, a strong choice for flat roofs with imperfect drainage. Each has trade-offs in cost, application requirements, and expected service life, which we walk through based on your specific roof.
Is Your Roof A Good Candidate For Coating?
Coating works best where the underlying structure and substrate are still sound — it seals and extends, it doesn’t fix structural problems. Flat and metal roofs are the most common good candidates. A roof with active structural leaks or a membrane too degraded to bond a new coating usually needs repair or replacement first, and we’ll tell you honestly which category yours falls into.
The Coating Application Process
The roof surface is cleaned thoroughly to remove dirt, chalking, and any loose material — adhesion depends entirely on a clean substrate. Cracks and seams are addressed before the coating goes on. The coating is applied to manufacturer-specified thickness, since under-application is the most common reason a coating underperforms, followed by a final check for full, even coverage.
Coating Maintenance & Recoat Timelines
A coated roof still benefits from periodic inspection, especially after major storms. Most coating systems are designed to be recoated rather than fully removed and reapplied, extending the roof’s protected life in stages over time. We’ll give you a realistic recoat timeline specific to the product used and your roof’s exposure conditions.
What's Included
- Roof condition assessment to confirm coating is the right fit
- Surface cleaning and prep before coating application
- Elastomeric coating applied for waterproofing and reflectivity
- Written estimate of the extended service life you can expect
Coating Types
Elastomeric Coatings, Specifically
What Makes A Coating "Elastomeric"
Elastomeric coatings are formulated to stretch and flex with a roof surface as it expands and contracts through Florida’s daily heat cycles, then return to their original shape — unlike a rigid coating that can crack under the same movement.
Best Suited Surfaces
Elastomeric coatings adhere well to a range of low-slope substrates, including modified bitumen, metal, and properly prepared concrete or foam roof surfaces — we’ll confirm compatibility with your specific roof during a free inspection.
Reflective & Waterproofing Properties
Most elastomeric coating systems are formulated with high solar reflectivity to reduce heat absorption, combined with a fully waterproof membrane once cured — both properties matter in South Florida’s combination of intense sun and heavy seasonal rain.
Roof Coatings Process
01
Inspect
Confirm the roof is a good candidate for coating rather than repair or replacement.
02
Clean & Prep
Surface cleaned and prepped for proper adhesion.
03
Coat
Elastomeric coating applied evenly across the roof system.
04
Inspect
Final check to confirm full, even coverage.
Common Questions
Roof Coatings, Answered Directly
Customer Reviews
What Fort Lauderdale Residents Are Saying
★★★★★ 4.8 out of 5 · 106 Google reviews
“Ricketts handled our roof repair after a bad storm and made the whole process easy — showed up when they said they would, explained what was actually wrong, and kept the property clean every day. Would recommend them to anyone in South Florida.”
A RICKETTS CONSTRUCTION CUSTOMER
Get A Free Quote
