Roof Types — TPO Roofing
TPO Roofing Contractor In Fort Lauderdale
Single-ply TPO membrane roofing for flat and low-slope commercial, multi-family, and residential additions across Broward, Miami-Dade and Palm Beach counties — installed and repaired by a licensed local crew.
★★★★★ 4.8
GOOGLE · 106 REVIEWS
Local & Family Owned
SINCE 2013
ShingleMaster
CERTAINTEED, GAF & IKO SHINGLES
GAF Certified
CERTIFIED ROOFING CONTRACTOR
Licensed
CCC1331129 / CBC1259476
No Deposit Required — You Only Pay When You’re Satisfied
What Is TPO Roofing?
TPO (thermoplastic polyolefin) is a single-ply, heat-welded membrane roofing system used on flat and low-slope roofs. It is typically installed in reflective white to reduce heat absorption — a real advantage under South Florida sun — and is one of the most common systems for commercial buildings, multi-family properties, and flat-roof additions on residential homes.
Who TPO Roofing Is Right For
- Commercial buildings with flat or low-slope roofs
- Multi-family properties — apartment and condo flat sections
- Residential flat-roof additions and Florida rooms
- Properties prioritizing energy efficiency (reflective membrane)
South Florida Considerations
TPO performs well under intense UV and heat, but South Florida conditions still demand attention: heat-cycling can stress seams over time, ponding water on poorly sloped sections accelerates wear, and wind uplift at edges and parapets is a real risk during hurricane season. Algae and mildew growth is common in our humidity and should be addressed during routine maintenance rather than left to spread.
Repair Or Replace? Decision Factors
Repair usually makes sense when:
A seam has separated, there is a localized puncture or tear, or flashing at a single penetration has failed — the rest of the membrane is intact.
Replacement usually makes sense when:
Multiple seams are failing, ponding has caused widespread membrane degradation, or the system is approaching the end of a typical 15–20 year TPO lifespan.
TPO Roofing — In Depth
TPO vs. PVC: What's The Difference?
TPO (thermoplastic polyolefin) and PVC (polyvinyl chloride) are both single-ply, heat-welded membrane systems and often discussed together, but they’re chemically different products. TPO is generally more affordable and widely used; PVC offers superior resistance to chemical exposure and grease, which makes it a common choice for roofs near restaurant exhaust systems or industrial equipment. Both are reflective, seamless once installed, and share similar wind and waterproofing performance when properly installed.
Membrane Thickness & Warranty Considerations
TPO membranes are commonly available in thicknesses ranging roughly from 45 mil to 80 mil — thicker membranes generally cost more but offer greater puncture resistance and longer manufacturer warranty terms. We match membrane thickness to the roof’s actual use — a roof with regular foot traffic for HVAC maintenance needs a heavier membrane than one that’s rarely accessed.
Heat-Welded Seams: Why Installation Quality Matters Most
TPO’s seams are fused together with hot-air welding equipment rather than adhesive, creating a bond that’s often stronger than the membrane material itself when done correctly. Improperly welded seams are the single most common cause of early TPO roof failure — which is why installation crew training and quality control matter as much as the membrane product itself.
Energy Efficiency of Reflective TPO
White TPO membrane reflects a significant portion of solar radiation rather than absorbing it, keeping the roof surface and the space directly below meaningfully cooler than a dark membrane or traditional built-up roof would. In South Florida’s year-round cooling season, that reflectivity translates into a real, ongoing reduction in HVAC load for commercial and multi-family buildings.
Our TPO Installation Process
01
Inspect
Assess the existing roof deck, drainage, and any moisture-damaged substrate.
02
Prepare
Tear off or overlay decision, substrate prep, and insulation as needed.
03
Install
Membrane rolled out and heat-welded at every seam for a fully sealed system.
04
Flash & Detail
Edges, parapets, and penetrations flashed and sealed against wind-driven rain.
05
Inspect & Warranty
Final walkthrough and workmanship warranty on file.
Common Questions
TPO Roofing, Answered Directly
Service Areas
TPO Roofing Across South Florida
Customer Reviews
What Fort Lauderdale Residents Are Saying
★★★★★ 4.8 out of 5 · 106 Google reviews
“Ricketts handled our roof repair after a bad storm and made the whole process easy — showed up when they said they would, explained what was actually wrong, and kept the property clean every day. Would recommend them to anyone in South Florida.”
A RICKETTS CONSTRUCTION CUSTOMER
Get A Free Quote
